After receiving a large amount of enquiries about the LED Dazzler Kit in the February edition of Silicon Chip Magazine, RMS will be stocking the whole kit as well as the blank PCB.
The complete kit will include the pcb, enclosure and all components as listed in the project article. Stocks should arrive by the end of February and will be available for sale directly from our website. Below are the ordering codes;
COMPLETE KIT - $39.95 + GST
Ordering Code - KIT-LED_DAZZLER
BLANK PCB ONLY - $8.95 + GST
Ordering Code - PCB-LED_DAZZLER
10W LED - $16.00 + GST
Ordering Code - W724C0-D1
(Not part of the kit)
10W LED PCB - $0.95 + GST
Ordering Code - STAR-P7
Freight Charges Australia Wide - $15.00 + GST
To read the article, go to page 24 of the February 2011 edition of Silicon Chip Magazine.
PLEASE NOTE: Power LEDs and Power Heatsink are not part of the kit.
Also, there is a technical error on the schematic diagram. The 22R resistors (there are two of them) should be changed to 10R as identified on the overlay on the pcb. Using 22R resistors will have little impact. However, the circuit will work slightly better if 10R is used.